Accessing the Web Interface

Step 1

Open your web browser and enter the IP address or host name of your appliance.

Step 2

[New Web Interface Only] You can access the new web interface in any one of the following ways:

Note	The new web interface of your appliance uses AsyncOS API HTTP/HTTPS ports (6080/6443) and trailblazer HTTPS port (4431). You can use the `trailblazerconfig` command in the CLI to configure the trailblazer HTTPS ports. Make sure that the trailblazer HTTPS port is opened on the firewall.

When trailblazerconfig CLI command is enabled, use the following URL - https://example.com:<trailblazer-https-port>/ng-login

where example.com is the appliance host name and <trailblazer-https-port> is the trailblazer HTTPS port configured on the appliance.

For more information on the trailblazerconfig CLI command, seeThe trailblazerconfig Command.
When trailblazerconfig CLI command is disabled, use the following URL - https://example.com:<https-port>/ng-login

where example.com is the appliance host name and <https-port> is the HTTPS port configured on the appliance.
Log in to the legacy web interface and click Security Management appliance is getting a new look. Try it!! link to access the new web interface.

Important

Make sure that AsyncOS API is enabled on the appliance.
You must login to the legacy web interface of the appliance.
If trailblazerconfig is enabled, the configured HTTPS port must be opened on the firewall. The default HTTPS port is 4431.

Also ensure that your DNS server can resolve the hostname that you specified for accessing the appliance.
If trailblazerconfig is disabled, the AsycnOS API ports configured in Management Appliance > Network > IP Interfaces, are opened on the firewall. The default AsyncOS API HTTP/HTTPS port is 6080/6443.

Step 3

Enter the following default values:

Note	This passphrase is NOT valid after you complete the System Setup Wizard, either using the web interface or the command-line interface.

Procedure